Audi A4, S4

Since 2000 of release

Repair and car operation

Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
- Suspension bracket and steering
   Security measures at work
   + Suspension bracket of forward wheels
   + Suspension bracket of back wheels
   - Corners of installation of wheels of the car
      Corners of installation of wheels of the car - the general information
      Conditions of check of corners of installation of wheels
   + Steering and safety pillows
+ Body
+ Onboard electric equipment

Conditions of check of corners of installation of wheels

Check of corners of installation of the car demands presence of a viewing hole or the special measuring lift. At measurement carrying out it is necessary to satisfy following conditions:

  • Pressure of air in tyres corresponds to the set.
  • Forward wheels are put directly.
  • The car is not loaded, the fuel tank is completely filled.
  • Suspension brackets of the car with force have been besieged.
  • The steering is adjusted.
  • Люфты in connections of steering draughts lie within the admissible.
  • Люфты in suspension bracket connections lie within the admissible.
  • Depth of drawing of a protector of tyres of one axis is identical.