Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   + The external equipment
   - The salon equipment
      Remarks on work with the salon and security measure equipment
      Removal and installation of spring clips
      Removal and installation of the central console
      Removal and installation of the holder of drinks
      Removal and installation of facing of the lever of a lay brake
      Removal and installation of a cover of the lever of switching of transfers/selectors
      Removal and ashtray installation
      Removal and installation of the central armrest
      Removal and installation of an internal mirror
      Removal and cover installation on a control panel
      Removal and pocket installation from outside the driver
      Removal and installation of a ware box
      Removal and installation противосолнечного a peak
      Removal and installation of facing of a rack And
      Removal and installation of the top facing of a rack In
      Removal and installation of the bottom facing of a rack In
      Removal and installation of a forward overlay of a threshold
      Removal and installation of facings (Sedan)
      Removal and installation of facings (Versatile person)
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of a forward seat belt
      Removal and installation of a back seat belt
+ Onboard electric equipment






Removal and installation of facing of the lever of a lay brake

Removal

 PERFORMANCE ORDER

  1. Lift the lever of a lay brake.
  1. The first variant of execution: Take out a safety pin (2) (an arrow And on an accompanying illustration) and remove facing of the handle (1) in an arrow direction ().
  1. The second variant of execution: Press a screw-driver a spring downwards and disconnect from a hook. Simultaneously strongly pull and remove facing of the handle (1) in an arrow direction ().
  1. Remove facing of the handle of a brake (1).
  1. Lift upwards the handle of a lay brake, turn out 2 screws (3) and remove the holder (2).

Installation

 PERFORMANCE ORDER

  1. Put on the handle of a lay brake facing and press into facing a lock pin.
  2. Lift upward the lever of a lay brake, put on the lever the holder and screw 2 screws.
  3. Completely release the lever of a lay brake.
  4. Tighten screws the moment 4Нм and insert facing (1) behind into an aperture (4).
  5. Press lever facing.


home