Replacement of elastic bands of brushes of a screen wiper Replacement is necessary for making at deterioration of clearing of glass. Thus it is possible to replace only elastic bands, or complete with щёткодержателями. If elastic bands are replaced only, it is necessary to check up, whether has deformations щёткодержатель. Removal
|
- Raise the lever and hold a brush perpendicularly to the lever.
|
- Press a spring clip in a direction of an arrow and put forward a brush downwards from a hook on the lever. Unhook a lever brush.
|
|
-
Squeeze flat-nose pliers on the closed party of a brush both steel tyres and take out them sideways from top скобы. Further extend rubber together with directing of the rest скобы brushes.
|
|
|
Installation
|
- Insert a new elastic band without tyres in bottom скобы brushes.
|
- Enter both tyres into the first flute of a brush so that grooves of tyres showed towards an elastic band and fix in flute pads.
|
- Compress both steel tyres and a brush пассатижами and insert in top скобу so that pads скобы from both parties have entered into grooves (the marksman on an accompanying illustration) brushes.
|
|
- Insert a brush (2) into the lever (1). Thus the brush of the left lever should incorporate to a collar, and the directing pad should enter into a brush.
|
|
- Press the button of fixing and fix a brush.
|
- Cast away a brush back. Watch that the brush elastic band on all length adjoined to glass, if necessary, cautiously turn in the holder.
|
|
|