Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
The general data and security measures at carrying out кузовных works
Cleaning and leaving
Repair of insignificant damages кузовных panels
Repair of considerable damages of a body
- The external equipment
Installation of the forward panel in position for maintenance service
Removal and installation of a cover of a water modular compartment
Removal and installation of a forward bumper
Removal and installation локера a back wing
Removal and installation локера a forward wing
Removal and installation of a forward wing
Removal and installation of a back bumper
Removal and cowl installation/adjustment
Removal and installation of a cable of a drive of a cowl
Removal and installation of a clamp of the lock
Removal and installation of facing of a forward door
Removal and installation of facing of a back door
Removal and door installation
Door adjustment
Removal and installation of a frame of a window of a forward door
Removal and installation стеклоподъёмника
Removal and installation of the electric motor of a drive стеклоподъёмника
Removal and installation of the lock of a door
Removal and installation of the handle of a door
Removal and installation of the cylinder of the lock of a door
Removal and installation of facing of a cover of a luggage carrier
Removal, installation and adjustment of a cover of a luggage carrier
Removal and installation of the lock of a luggage carrier
Removal and installation of facing of a door of a back (Versatile person)
Removal and installation of a door of a back (Versatile person)
Removal and installation of the lock of a door of a back (Versatile person)
Removal and installation of an external mirror
Removal and installation молдингов
Removal, installation and check сдвижной roof panels
Removal and overlay installation сдвижной roof panels
Check and starting position adjustment сдвижной roof panels
Removal and sealant installation сдвижной panels
Replacement of elastic bands of brushes of a screen wiper
Removal and jet installation стеклоомывателя a windscreen
Removal and installation of a jet of a washer of back glass
Removal and installation of the lever of a cleaner of a windscreen
Removal and installation of the lever of a cleaner of back glass
Removal and installation of jets фароомывателя
Adjustment of levers of a screen wiper
+ The salon equipment
+ Onboard electric equipment
|
Removal and installation of a frame of a window of a forward door
Frame of a window of a forward door
Removal
|
- Disconnect a negative cable (-) the storage battery.
- Remove a door upholstery, address to corresponding Section.
- Disunite all sockets.
- Remove the electric motor стеклоподъёмника, address to Section Removal and installation of the electric motor of a drive стеклоподъёмника.
- Turn out consistently bolts (7), (4), (8), (10), (6) and (9), preliminary having uncovered (5).
- Take out upwards a frame of a window (1) with стеклоподъёмником (2) of a door (3). An arrow – the fixing screw.
|
|
Installation
|
- Enter glass on half into a window frame.
- Insert a frame of a window with стеклоподъёмником from above into a door.
- Press carving fingers of the electric motor стеклоподъёмника through the internal panel of a door so that they were fixed.
- Lay above a sealant of a door at a window frame.
- Screw consistently bolts (6), (9), (4), (8), (10) and (7).
- Tighten by hand bolts (6) and (9).
- Press from above a window frame inside and tighten bolts (4) and (8) moment 32Нм. Press on a cover (5).
- Tighten bolts (6) and (9) moment 32Нм.
- Tighten a bolt (10) moment 10Нм.
- Tighten bolts (7) moment 6Нм.
- Tighten fixing screw (arrow) the moment 32Нм.
- Establish into place the drive electric motor стеклоподъёмника, address to Section Removal and installation of the electric motor of a drive стеклоподъёмника.
- Join a socket.
- Establish a door upholstery, address to Section Removal and installation of facing of a forward door.
- Attach a negative cable (-) the storage battery.
|
|
|
home
|