Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
+ Current leaving and service
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
- Body
   The general data and security measures at carrying out кузовных works
   Cleaning and leaving
   Repair of insignificant damages кузовных panels
   Repair of considerable damages of a body
   - The external equipment
      Installation of the forward panel in position for maintenance service
      Removal and installation of a cover of a water modular compartment
      Removal and installation of a forward bumper
      Removal and installation локера a back wing
      Removal and installation локера a forward wing
      Removal and installation of a forward wing
      Removal and installation of a back bumper
      Removal and cowl installation/adjustment
      Removal and installation of a cable of a drive of a cowl
      Removal and installation of a clamp of the lock
      Removal and installation of facing of a forward door
      Removal and installation of facing of a back door
      Removal and door installation
      Door adjustment
      Removal and installation of a frame of a window of a forward door
      Removal and installation стеклоподъёмника
      Removal and installation of the electric motor of a drive стеклоподъёмника
      Removal and installation of the lock of a door
      Removal and installation of the handle of a door
      Removal and installation of the cylinder of the lock of a door
      Removal and installation of facing of a cover of a luggage carrier
      Removal, installation and adjustment of a cover of a luggage carrier
      Removal and installation of the lock of a luggage carrier
      Removal and installation of facing of a door of a back (Versatile person)
      Removal and installation of a door of a back (Versatile person)
      Removal and installation of the lock of a door of a back (Versatile person)
      Removal and installation of an external mirror
      Removal and installation молдингов
      Removal, installation and check сдвижной roof panels
      Removal and overlay installation сдвижной roof panels
      Check and starting position adjustment сдвижной roof panels
      Removal and sealant installation сдвижной panels
      Replacement of elastic bands of brushes of a screen wiper
      Removal and jet installation стеклоомывателя a windscreen
      Removal and installation of a jet of a washer of back glass
      Removal and installation of the lever of a cleaner of a windscreen
      Removal and installation of the lever of a cleaner of back glass
      Removal and installation of jets фароомывателя
      Adjustment of levers of a screen wiper
   + The salon equipment
+ Onboard electric equipment






Removal and installation of a back bumper

Back bumper

Instructions: Removal and installation on models the Sedan is carried out similarly. Unlike models the Versatile person there are no basic and sealing laths (7), (9), and also a support (14).
1 — Two bolts
2 — Loker of a wing
3 — the Nut
4 — the Nut
5 — Directing
6 — Six clips
7 — the Basic lath
8 — the Bolt

9 — the Sealing lath. It is inserted into a bumper
10 — the Decorative lath. It is inserted into a bumper
11 — the Lateral sealing lath. It is inserted into a bumper
12 — the Bumper
13 — Two bolts
14 — the Support. At installation of a new bumper it should be replaced.
15 — the Shock lath
Instructions: the Shock lath is fixed on a back bumper by a bilateral sticky tape. Thereof at removal it collapses.

The versatile person

Removal

 PERFORMANCE ORDER

  1. Disconnect a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.

Some operations are carried out as with left, and справой the car parties. Their description is given only concerning one party.

  1. Remove lateral facing in a cargo compartment, address to Section Removal and installation of facings (Versatile person).
  2. Disunite a socket of a loudspeaker behind lateral facing and disconnect a loudspeaker together with the amplifier.
  3. Disunite a socket of parking sensor controls at the management block under a back lantern.
  4. Turn away a nut (3) and nuts (4) in a cargo compartment.
  5. Turn out bolts (13).
  6. Disconnect локер a wing in a back part.
  7. Turn out a bolt (1) at directing (5) and remove a lateral part of a bumper.
  8. By means of the assistant pull back a bumper and remove it.

Installation

 PERFORMANCE ORDER

  1. Installation is carried out in sequence, return to removal.
  2. At installation of a new bumper establish from below a new support (14). Then release a support, having pulled for a thread. Thus the support unloads and holds a bumper in relation to a cross-beam.

The support is released when the bumper is completely established.

  1. Attach a negative cable (-) the storage battery.

Observe instructions Replacement of the storage battery Has undressed.



home