Check of level of a liquid of system of hydrostrengthening of a wheel Periodically check liquid level in system of hydrostrengthening of a wheel in order to avoid occurrence of problems with management of the car, such, as damage of the steering pump. Oil level is necessary for checking in cold or warm (not above + 50 С) an engine condition.
|
|
Do not keep a steering wheel turned against the stop in this or that party more than five seconds. It can put out of action the steering pump. |
The tank of system of hydrostrengthening of a wheel is located in an impellent compartment and has unscrewing cover with built in in it measuring probeом.
|
|
- Park the car on an equal platform and cock a lay brake. Establish forward wheels in position "directly".
|
- Turn away a stopper of the tank for oil. Wipe the level index on a cover pure, not разлохмаченной, a rag.
|
|
- Screw and again turn away a cover by hand. Oil level should be on 2 mm above or below mark MIN.
|
|
- Add in system necessarily only pure oil since even insignificant pollution can lead to malfunctions in hydrosystem work.
- Screw a tank cover by hand.
|
|
Check at working temperature of the engine
|
|
- Warm up the engine and stop it. Oil should get warm to temperature + 50С.
- Allow to work to the engine on single turns and establish wheels directly.
- Check up oil level at the working engine. Oil level at a wrapped up stopper should lie between labels MIN and MAX.
|
|
|