Audi A4, S4

Since 2000 of release

Repair and car operation



Audi A4, S4
+ Introduction
+ Controls and receptions of safe operation
- Current leaving and service
   Specifications
   The indicator of term of approach of maintenance service
   The routine maintenance schedule
   The general information on adjustment
   Check of levels of liquids, the control of leaks
   Check of a condition of tyres and pressure in them. A designation of tyres and disks of wheels. Rotation and replacement of wheels
   Replacement of impellent oil and the oil filter
   Checks of brake system. Adjustment of a lay brake
   Check of fuel system
   Check of a condition and replacement of hoses of an impellent compartment, localisation of leaks
   Check of a condition of ridge belts of a streaming drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of a cooling liquid
   Check of a condition of system of release of the fulfilled gases
   Check of level of oil of automatic transmission
   The visual control of a box of a gear change and the main transfer on leaks, check of level and oil addition
   Check of a condition a suspension bracket and steering component
   Check of a condition of protective covers of power shafts
   Check of level of a liquid of system of hydrostrengthening of a wheel
   Check of a central air of air
   Greasing of terminators of doors, cylinders of locks, cowl hook, сдвижной panels of the hatch of a roof
   The visual control of a seat belt and the block of a pillow of safety
   Check of working capacity of headlights and horn
   Condition check, adjustment and replacement of brushes of screen wipers
   Check of a condition of the battery, care it and gymnastics
   Replacement of the battery of emergency supply of system Telematik
   Replacement of an element of the filter of air of salon / the coal filter of clearing of air
   Replacement of a brake liquid
   Check and replacement of spark plugs. Check of a condition of high-voltage wires
   Replacement of an element of the air filter of the engine
   Replacement of the fuel filter
   Check of a condition and tension of a gear belt
+ The engine
+ Systems of cooling, heating and the air conditioner
+ Power supply systems, release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling, power shafts and differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition of system of release of the fulfilled gases

 PERFORMANCE ORDER

  1. Check should be made at the cold engine, therefore is better be engaged in it before the first trip for a present day or not earlier than in three hours after engine deenergizing. Check up a condition twist release systems, beginning from the engine and finishing an exhaust pipe cut. In an ideal this check should be spent at lifted on лебёдке the car when from below to it there is an easy approach. If лебёдка it is inaccessible, поддомкратьте the car and reliably establish it on support.
  2. The diesel engine: Remove the bottom cover of the engine, address to Section Removal and installation of the top cover of the engine / the bottom protection of an impellent compartment/stretcher.
  3. Check pipes and trumpet connections on presence of signs of leaks, strong corrosion and damages. Check up a condition and reliability of fastening of all скоб and подвесов systems.
  1. Simultaneously examine the car bottom on presence of holes, the corrosion, the dispersed seams and the other defects supposing penetration of fulfilled gases in salon of the car. Close up all apertures suitable hermetic.
  1. Shine system of release with a lamp and survey about presence of holes, проржавелых places and retyrannies.
  2. In the presence of strong dents replace pipes of system of release.
 
  1. Check up all rubber holders, turning and rotating them, on presence of cracks and, if necessary, replace
  1. The petrol engine: Check up electric joinings and reliability of fastening of a ljambda-probe.
  2. The diesel engine: Establish the bottom cover of the engine, address to Section Removal and installation of the top cover of the engine / the bottom protection of an impellent compartment/stretcher.
  3. Survey of an internal surface of an exhaust pipe allows to define a current working condition of the engine. The structure of adjournment in a pipe speaks about quality of options of the engine. If the pipe from within black and smoked, it can specify that it is necessary to check up fuel system carefully.
  4. Lower the car on wheels.


home